can’t boot

[NOEXECUTE=OPTIN/MININT ]

problem is happening every time I re-boot, the MININT thing is re-appearing and bringing the blue screen and not loading Windows.

It is especially common on hard drives that contain multiple partitions (ie. almost all OEM installs).

Sometimes the MBR just becomes damaged, other times a boot virus is the cause.

A problem has been detected and windows has been shut down to prevent damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows update you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory optioins such a caching or shadowing.

Technical informaiton:

*** STOP: 0000000A (0xFFFFFFFFFFFFFF8D,0x000000000000002,0x000000000000000,0xFFFFF8000C186434)

在此 Stop 错误消息中,每个参数均是一个指代特定问题的十六进制数字:

  • 参数 1 – 引用不正确的地址。
  • 参数 2 – 访问内存所需的 IRQL。
  • 参数 3 – 访问类型,其中 0 是读操作,1 是写操作。
  • 参数 4 – 在参数 1 中引用内存的指令的地址。

安装过程中当在内核模式下试图以过高的进程内部请求级别 (IRQL) 接触可分页内存时,此 Stop 错误通常会出现。此错误通常在驱动程序使用不正确的内存地址时发生。此错误其他可能的原因包括设备驱动程序不兼容、常规硬件问题以及软件不兼容。

Stop 0×0000000A: IRQL_NOT_LESS_OR_EQUAL – This Windows stop error indicates that a kernal mode process or driver tried to access a memory location that it did not have permission to access, or at a IRQL that was too high (a kernal mode process can only access a IRQL that is lower than or equal to its own IRQL.

This stop message usually means that there is incompatable or faulty hardware. In personal experience its usually bad ram.

Tech Advise :

Remove and Check any of the following devices:

1. SCSI Devices

2. IDE Devices

3. Network Adapter

4. Internal Modem & Sound Card

5. Extra Hard Disks (You have to have at least one to complete the installation)

6. Cd Drive or DVD Drive (If you are installing from the local hard disk)

7. Upgrade Computer BIOS if possible

Check Event Log

Open Event Viewer

Here you need to look for red X with error reports. This will let you know what caused your pc to crash last time or program conflicting on your PC. Advisable to remove the program and  then check if your PC works better or not.

3.  Repair Windows to fix

STOP: 0×0000000A  | Error – IRQL_NOT_LESS_OR_EQUAL

How to Repair windows – Check this link on how to run windows repair

4. Check your RAM

Check If any of your RAM is malfunctioning. If you have 2 rams installed then try removing one them and reboot PC. Poor and damaged RAM can also cause such errors.

Stop 0×0000001E KMODE_EXCEPTION_NOT_HANDLED

Windows Stop Error Codes

Stop 0×00000003 UNSYNCHRONIZED_ACCESS
Stop 0×0000000A IRQL_NOT_LESS_OR_EQUAL
Stop 0×0000001E KMODE_EXCEPTION_NOT_HANDLED
Stop 0×00000023 FAT_FILE_SYSTEM
Stop 0×00000024 NTFS_FILE_SYSTEM
Stop 0×0000002E DATA_BUS_ERROR
Stop 0×0000003F NO_MORE_SYSTEM_PTES
Stop 0×00000044 MULTIPLE_IRP_COMPLETE_REQUESTS
Stop 0×00000050 PAGE_FAULT_IN_NONPAGED_AREA
Stop 0×0000006B PROCESS1_INITIALIZATION_FAILED
Stop 0×00000073 CONFIG_LIST_FAILED
Stop 0×00000074 BAD_SYSTEM_CONFIG_INFO
Stop 0×00000076 PROCESS_HAS_LOCKED_PAGES
Stop 0×00000077 KERNEL_STACK_INPAGE_ERROR
Stop 0×00000079 MISMATCHED_HAL
Stop 0×0000007A KERNEL_DATA_INPAGE_ERROR
Stop 0×0000007B INACCESSIBLE_BOOT_DEVICE
Stop 0×0000007E SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Stop 0×0000007F UNEXPECTED_KERNEL_MODE_TRAP
Stop 0×0000008E KERNEL_MODE_EXCEPTION_NOT_HANDLED
Stop 0×0000009C MACHINE_CHECK_EXCEPTION
Stop 0×0000009F DRIVER_POWER_STATE_FAILURE
Stop 0×000000BE ATTEMPTED_WRITE_TO_READONLY_MEMORY
Stop 0×000000C2 BAD_POOL_CALLER
Stop 0×000000C4 DRIVER_VERIFIER_DETECTED_VIOLATION
Stop 0×000000CA PNP_DETECTED_FATAL_ERROR
Stop 0×000000CB DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS
Stop 0×000000CE DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS
Stop 0×000000D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL
Stop 0×000000D5 DRIVER_PAGE_FAULT_IN_FREED_SPECIAL_POOL
Stop 0×000000D8 DRIVER_USED_EXCESSIVE_PTES
Stop 0×000000DA SYSTEM_PTE_MISUSE
Stop 0×000000EA THREAD_STUCK_IN_DEVICE_DRIVER
Stop 0×000000ED UNMOUNTABLE_BOOT_VOLUME
Stop 0×000000F2 HARDWARE_INTERRUPT_STORM
Stop 0×000000FC ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
Stop 0×000000FE BUGCODE_USB_DRIVER
Stop 0xC0000218 UNKNOWN_HARD_ERROR
Stop 0xC000021A STATUS_SYSTEM_PROCESS_TERMINATED
Stop 0xC0000221 STATUS_IMAGE_CHECKSUM_MISMATCH
Stop 0xC0000244 STATUS_AUDIT_FAILED

Since I have fixed countless PC problems I can tell you by experience that a majority of the blue screen errors I have encountered are due to one of three things:

  1. Device drivers
  2. RAM errors
  3. HEAT

That’s it. There are less common causes such as a failing PSU (power supply), but for most users it’s going to be one of the top three culprits listed above

Steps To Fix Blue Screen Errors (Windows 7)

Note: You may be prompted to enter your administrator’s password when you try to execute certain system tasks!

Method 1: Using System Restore

  1. Click on the Start button on the Taskbar.
  2. Type “System Restore” (without quotes) in the Search box and hit Enter or,
  3. Click on System Restore (when you see System Restore pop up  in the list of search results).
  4. Make sure the “Recommended restore” radio button is checked on the restore utility window.
  5. Click on Next and follow the instructions given.

Note: There is the option on the restore utility to select “Choose a different restore point”. Unless you have a specific reason to select a different date and time than what Windows recommends, just select the recommended option stated in the steps above. If you choose to select another one, follow these steps:

  1. Click on that desired date and time, and Windows 7 will perform a scan for any affected programs in that restore point.
  2. Once completed, click Next and follow the instructions given.

Once you have selected the restore point, your system will start the restoring process, after which you will have to restart the system.

Method 2: Check memory problems

Memory management issues can also cause a BSOD in Windows 7. Thankfully, Windows 7 has a Memory Management Diagnostic tool that detects and solves problems related to system memory.

  1. Click on the Start button on the Taskbar.
  2. Type “Windows Memory Diagnostic Tool” or “Memory” (without quotes) in the Search box or,
  3. Click on Windows Memory Diagnostic Tool (in the search results).
  4. Click on “Restart now and check for problems (Recommended)”.
  5. The system will restart, and you need to follow the instructions given on the screen.

Method 3: Remove unsupported devices

Unsupported hardware may also result in a BSOD error. The easiest solution to this problem is to uninstall such hardware. You can detect the hardware that’s creating the problem through the Device Manager in Windows.

  1. Click on the Start button on the Taskbar.
  2. Type “Device Manager” in the Search box.
  3. Click on Device Manager (in the list of results).
  4. Expand all categories in the hardware tree – (click the little arrow icons).
  5. Look for devices that have a red cross (x) against their name. These devices are not supported by Windows 7 and may be one of the reasons for BSOD errors.
  6. Right click on these devices, and select Uninstall.

A corrupt registry can also lead to BSOD errors in Windows 7. I would suggest you to download a good registry cleaner and scan your system for registry errors. You can find one on my recommended software page. There are both free and paid versions available and they both have pros and cons. Most of the registry cleaners available are easy to install and operate.

The cleaning process is automated, and the programs also backup the registry before cleanup, which acts as a safeguard. You can restore the registry to its previous state if you encounter system errors after the cleaning process.

There’s really no need to panic when you see a BSOD error on your screen. Just stay calm and follow the checklist above to fix the error.

via http://windows-exe-errors.com/how-to-fix-blue-screen-of-death-in-windows-7/

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

生活在西班牙

自己动手丰衣足食

BlueAsteroid

Just another WordPress.com site

Jing's Blog

Just another WordPress.com site

Start from here......

我的心情魔方

天才遠私廚

希望能做一個分享各種資訊的好地方

语义噪声

西瓜大丸子汤的博客

笑对人生,傲立寰宇

Just another WordPress.com site

Where On Earth Is Waldo?

A Project By Melanie Coles

the Serious Computer Vision Blog

A blog about computer vision and serious stuff

Cauthy's Blog

paper review...

Cornell Computer Vision Seminar Blog

Blog for CS 7670 - Special Topics in Computer Vision

datarazzi

Life through nerd-colored glasses

Luciana Haill

Brainwaves Augmenting Consciousness

槑烎

1,2,∞

Dr Paul Tennent

and the university of nottingham

turn off the lights, please

A bunch of random, thinned and stateless thoughts around the Web

%d bloggers like this: